| Lens | * |
|---|---|
Red is the hyperfocal distance. Focus there and everything from the near distance (half the hyperfocal) to infinity is acceptably sharp.
Blue columns are the landscape sweet spot for this sensor. Columns marked * lose fine detail to diffraction.
Need one exact combination at a specific subject distance? Use the depth of field calculator.
How to Use Hyperfocal Focusing in the Field
Hyperfocal focusing is the fastest way to get a landscape sharp from the foreground to the horizon in a single frame. It works with any lens, any camera, and no focus stacking.
The catch is that the numbers change with every focal length and aperture. A chart in your bag or on your phone means you never have to work them out on location.
How to Read the Chart
Find your focal length on the left and your aperture across the top. The red number is where to focus. The near number below it is the closest point that will still look sharp.
With a full frame camera at 24mm and f/8, for example, the chart says to focus at about 2.4 m (8 ft). Everything from about 1.2 m (4 ft) to infinity will be acceptably sharp.
If your nearest foreground rock is closer than the near number, you have three choices. Stop down one stop, zoom wider, or step back.
A Simple Field Routine
- Compose first. Pick your focal length and find your nearest important detail.
- Choose an aperture in the sweet spot for your sensor (f/8 to f/11 on full frame).
- Check the chart and make sure the near number is closer than your foreground.
- Focus at the red distance, or a little beyond it.
- Switch to manual focus so the camera does not refocus when you press the shutter.
- Zoom in on the screen and check both the foreground and the horizon.
The where to focus in landscape photography guide goes deeper on picking that focus point for different scenes.
How to Focus at a Distance Without a Distance Scale
Most modern lenses have no distance scale, and the ones on some lenses are too vague to trust. You can still hit the hyperfocal distance with a few easy tricks.
- Pace it out. One normal adult step is close to 0.75 m (2.5 ft). Walk the distance, note a rock or tuft of grass there, walk back, and autofocus on it.
- Use your height. The ground at your feet when you look straight down is about 1.5 to 1.8 m away from a camera at eye level. That is close to the hyperfocal distance for many wide lenses at f/11.
- Read the focus distance display. Many mirrorless cameras show the distance in the viewfinder while you focus manually. Turn it on in the display settings.
- Find a marker at the right spot. A fence post, a bush, or a person standing there gives autofocus something to lock onto. Then switch to manual focus before you recompose.
Always err long. Focusing a little beyond the hyperfocal distance costs a bit of foreground. Focusing short of it costs the horizon, and a soft horizon is the more obvious flaw.
Common Hyperfocal Mistakes
Treating acceptably sharp as tack sharp. Only the exact focus distance is at peak sharpness. The near limit and infinity are just inside the standard for a normal size print. For big prints, switch the chart to critical sharpness.
Using a chart made for another sensor. A full frame chart on an APS-C or Micro Four Thirds camera puts your focus point too close. Make a chart for the camera you actually carry.
Stopping down too far. f/22 gives the closest hyperfocal distance, but diffraction softens the whole frame. The dimmed columns in the chart show where that starts for your sensor.
Letting autofocus take over. If focus is on the shutter button, the camera may refocus on the sky. Use manual focus or back button focus to lock it.
Using it for scenes with a very close foreground. When a flower sits a few centimeters from the lens, no single focus point covers it all. That is the time to focus stack or use other techniques instead.
Why Charts Disagree
Every hyperfocal number depends on the circle of confusion, the largest blur spot that still looks sharp. This chart uses 0.030 mm for full frame, the same value as the depth of field calculator on this site.
Some apps use a slightly smaller value, so their numbers run a few percent longer. The difference rarely matters in the field, especially if you focus a little past the number.