Side by Side Comparison
| Measure | |
|---|---|
| (best in this row) |
What Really Changes Between Two Lenses
Lens spec sheets are full of numbers, and most of them only make sense once you know which camera the lens goes on. This tool turns those numbers into the things you actually see in a photo.
Swapping lenses changes your framing and the light reaching the sensor. It also changes how soft the background blur looks, which is the part spec sheets make hardest to judge.
Focal Length and Field of View
Focal length sets how much of the scene fits in the frame. A shorter lens takes in more, and a longer lens takes in less and makes distant things look bigger.
Sensor size changes that picture. A smaller sensor only records the middle of the image, so a 35mm lens on a 1.5x APS-C camera frames like a 52mm lens on full frame. That number is the 35mm equivalent focal length, and it is the fairest way to compare lenses across systems.
For a quick visual of two focal lengths, the field of view comparison overlays them on one frame. The crop factor calculator converts any lens to its full frame equivalent.
Equivalence Explained Plainly
The f-number on your lens controls exposure. At f/1.8, a scene needs the same shutter speed and ISO on any camera, from a phone to medium format. Your light meter only cares about the f-number.
Depth of field is different. Multiply the f-number by the crop factor and you get the equivalent aperture, which tells you how much background blur you get at the same framing. A 25mm f/1.7 on Micro Four Thirds frames like a 50mm and blurs like f/3.4 on full frame.
A smaller sensor at the same f-number gives the same brightness and deeper focus at the same framing. That helps for landscapes and works against you for portraits.
How the Blur Disc Is Worked Out
Background blur here is the size of the disc a small background highlight spreads into. The tool uses the thin lens formula b = f × m ÷ N × x ÷ (s + x). In that formula f is the focal length, N is the f-number, s is the subject distance, x is how far the background sits behind the subject, and m = f ÷ (s - f) is the magnification.
The result is shown as a share of the frame width, so a 2% disc looks the same size on any sensor. That makes 50mm f/1.8 vs 85mm f/1.8 a fair fight. With the same framing and a distant background, the 85mm gives about 1.7 times the blur.
Depth of field uses the same equations and circle of confusion values as the depth of field calculator, which also shows hyperfocal distance and a full aperture table.
Prime vs Zoom Tradeoffs
- Primes are usually faster, often f/1.4 to f/2. That means more light for low light and more blur for portraits, in a smaller and cheaper lens.
- Zooms cover many framings without moving your feet. A 24-70mm f/2.8 replaces several primes at the cost of size, weight, and about 1.3 stops of light against an f/1.8 prime.
- Variable aperture zooms like an 18-55mm f/3.5-5.6 lose light as you zoom in. Set the zoom position in the tool to see what you really get at the focal length you use most.
Stabilization buys slower handheld shutter speeds for still subjects. It does nothing for a moving subject, where a faster lens and a faster shutter speed still win.